P/N 01-344-00
The T1206 is designed to allow testing of ARINC 741 Satcom System SDU, RFU and HPA Line Replacement Units.
T1206 LRU Interface Cables:
T1206-01 P/N 55-1206-01 Satellite Data Unit Interface T1206-02 P/N 55-1206-02 Radio Frequency Unit Interface T1206-03 P/N 55-1206-03 High Power Amplifier Interface T1206-18 P/N 55-9037-00 RFU-900 Test Cable (8 in.)
The IFF-45TS is an RF signal simulator that provides support for AIMS Mark XIIA transponders and interrogators. It operates under remote control from a computer or ATE system and provides versatile signal generation and measurement capability of Mark XIIA system signals in bench and over-the-air applications.
Hand-held Analyzer Types 2250-W and 2270-W for Vibration Measurements
using FFT Analysis Software BZ‐7230 and Enhanced Vibration and Low Frequency Option BZ‐7234
Types 2250‐W and 2270‐W are the easy, safe and clever approach to machinery noise and vibration assessment, diagnostics and quality control. The analyzers combine advanced analysis techniques, tap‐and‐drag operation and a wide dynamic range to become the perfect on‐location machine vibration tool. Acceleration, velocity, and displacement are parameters traditionally used to assess a machine's health when initially installed or after maintenance, repair or overhaul (MRO). The Crest Factor is used to detect and diagnose defects in roller element bearings. Frequency analysis based on the fast Fourier transform (FFT) algorithm is an advanced tool for measurement and diagnostics of machinery noise and vibration. The frequency ‘profile’ of a machine is its fingerprint, revealing its sources of noise and vibration and their paths to the measurement position.
A new, cost-effective RF testing tool for the RF professional who demands more from a communications service monitor. The 2944B Communications Service Monitor is the lightest, most rugged service monitor available with a full performance spectrum analyzer as standard.
The RDX-7708 Test Set provides an RF source and monitor for complete RF testing of ARINC 708 T/R (Transmitter/Receiver) units including wind shear variants.
Excellent noise characteristics and low spurious signals for a wide range of critical measurements.
The IRIS 2000 is a modular general purpose Automated Test Equipment (ATE) station, capable of testing a wide variety of avionics Line Replaceable Units (LRU's). Aeroflex continually monitors the state of the art in ATE systems and incorporates the latest enhancements, such as our ATE Management System & THOR Test Executive, to ensure a modern system with a long useful operational life.
A suite of measurement functions to analyze a wide range of modulation schemes including FM, PSK and QAM. This measurement suite enables testing of wireless technologies such as those found in FM radio, ZigBee® (802.15.4), TETRA, tire pressure monitoring systems (TPMSs), satellite communications, and commercial broadcast systems among others